Also included in this guide is the year of manufacturing, and how to find that. Here is a list of elevator brands and models, how an serial number of a certain brand are arranged and where to find the serial numbers and built year within the cab, machine room and elevator shaft. On elevators made by ASEA-Graham in Sweden, there are usually no spots were you can find any serial numbers or built year at all within the cab. You have to rely on the inspection cerificate and if the elevator have swing doors, there might be a built year stated in there.
But if you visit the machine room, however, there will be a plate on the main control cabinet's short side showing both built year and serial number stated as Reference number here. On Kone elevators, there are numerous ways to identify the serial numbers and built years.
Most of the examples shown here are from Finland and Sweden. KONE list their serial numbers before with the letter H followed by an number.
This also applies on Kone marine elevators in cruise ships and cruise ferries built under the MacGregor brand these marine elevators often have the words "Manufactured By KONE" listed on the bottom of the panel.
After , they used 8-number digits instead. Note that in Australia, the number listed on the indicator is known as the Equipment Number.
Kone serial numbers are occasionally assigned to non-Kones if Kone have the maintenance contract. Serial numbers and built years are shown on the button panels themselves. This applies to Swedish elevators between and and in Finland up until Kone Novel Elements re-introduced the inclusion of serial numbers and built years on the panels.
They can be found below the floor indicators from now on. Elevators in Finland modernized by Kone usually stated both the built year, modernization year and the original serial number in the same ways as above.
In Sweden, at transit locations such as railway stations, Kone have made a custom design using Dewhurst fixtures. Since , the built year and serial numbers are present on the panel itself. Almost any Otis elevators in Europe states both the serial number and year of installation on the car operating panels. Serial number format varies on different elevator models. Note that this also applies on European Otis elevator models installed in regions other than Europe or Asian Otis elevator models manufactured by Otis Electric.
On Otis Europa elevators, both the serial number and build year can be found under the intercom speaker. The serial number usually starts with number "73" followed by two letters usually "NK", but some others may use different letters and four digit numbers example "73 XX " or "73 NK ". On Otis and European Gen2 elevators, both the serial number and build year are listed along with the capacity just under the floor indicator.
These elevators use 8 digit serial number, usually starts with two digit numbers which represent a country code and the company of installation , for example, 31 for Otis Australia, and 51 for Otis Elevator Co. HK Ltd. For Otis GeN2 elevators with large LCD displays in Spain, both the serial number and build year are listed on the display, usually near the bottom left corner of the screen.
There are known examples of Kone maintaining Gen2s and using it as their registration number for maintenance. Certain older European Otis elevator models have slightly different serial number format. For example, there are some older Otis elevators with serial numbers that starts with two digit numbers followed by three letters and then a three digit numbers example "00 XXX ". With your Luxury PI, your building can have the most unique screen style displays on the market to day.
OTIS Voice. This product was designed to function directly from the Otis series controller without the use of an interface card. Our voice unit is capable of up to 8 minutes of speech in either male of female voice for the annunciation of floor, direction and emergency messages. Custom messages in English as well as other languages are available. Consult your sales representative for options.
OTIS Worldwide Because of our long standing partnership with Otis Elevator, we have created a line of products that works in conjunction with Otis controllers. OTIS Displays Each of the following displays was designed to run directly from the Otis series controllers, giving your customers more style options.
Display 5 10 15 20 25 30 50 All. In most static systems, the balance must be checked by an installer […]. Hydraulic rope equalizers provide real-time rope tension adjustments across elevators and other lift systems while in operation.
As safety and maintenance are paramount, elevator installers are now considering increasing the use of hydraulic rope equalizers. While […]. Welcome to Tomorrow. We are everywhere people are on the move. We are combining our legacy as an industry pioneer, our current industry leadership position and our vision to give people freedom to connect and thrive in a taller, faster, smarter world.
We are excited to return to our roots and as an independent, publicly traded company on the New York Stock Exchange, where we were first listed years ago. Visit our investor relations site to learn more about our growth and value creation strategy. Otis Elevator Company - When you rise, we shine. Your vision in motion Our Otis Create tool can help simplify elevator system planning, with recommended configurations, customized performance details and more — all in a few clicks.
0コメント