If you accidentally drop the camera into water, promptly consult your nearest Canon Service Center. Wipe off any water droplets with a dry cloth. If the camera has been exposed to salty air, wipe with a well-wrung wet cloth. Using Canon CF cards is recommended. Page Nomenclature Nomenclature For detailed information, reference page numbers are provided in parentheses p.
Page 11 Dioptric adjustment knob p. Partial metering circle Exposure level indicator Exposure compensation amount Page Getting Started Getting Started This chapter explains a few preliminary steps and basic camera operations. Attach the battery. Remove the caps. Insert the CF card. As shown by the arrow, Never do the following while the access lamp is lit or blinking.
Such actions may destroy the image data. To turn on the camera again, just press the shutter button. Each captured image is recorded with the date and time it was taken. Make sure you set the date and time correctly. Page Cleaning The Cmos Sensor To avoid this, follow the procedure below to clean the image sensor.
Note that the image sensor is a very delicate component. If possible, you should have it cleaned by a Canon Service Center. While you clean the image sensor, the camera must be turned on. If the power is cut off, the shutter will close and it may damage the shutter curtains and image sensor. Everything is automatic so it is easy to photograph any subject.
With nine AF points to focus the subject, anyone can easily take nice pictures. Page Basic Zone Modes Basic Zone Modes Select a shooting mode to suit the target subject, and the camera will be set to obtain the best results. Portrait Landscape Close-up This mode blurs the background to make the human subject stand out.
This is for fast-moving subjects when you want to freeze the action. You can use self- timer in any Basic Zone mode or Creative Zone mode.
Do not stand in front of the camera when you press the shutter button to start the self-timer. Page Image Settings This chapter explains the digital image settings for the image-recording quality, ISO speed, white balance, color space, and processing parameters. In the 1 mode, the captured image will require post-processing with the software provided. Page 47 The single image size, number of possible shots, and maximum burst during continuous shooting p.
The actual single image size, number of possible shots, and maximum burst will vary depending on the subject, shooting mode, ISO speed, parameters, etc. Page 48 3 Setting the Image-recording Quality Max. Burst During Continuous Shooting The maximum burst during continuous shooting depends on the image- recording quality. The approx. Note that with high-speed CF cards, the maximum burst may be higher than shown in the table below depending on the shooting conditions.
A higher ISO speed number indicates a higher sensitivity to light. Therefore, a high ISO speed is suited for low light and moving subjects. However, the image may look more coarse with noise, etc. Page Setting The White Balance To the human eye, a white object looks white regardless of the type of lighting. With a digital camera, the color temperature can be adjusted with software so that the colors in the image look more natural.
Page Custom White Balance Custom White BalanceN With custom white balance, you shoot a white object that will serve as the basis for the white balance setting. By selecting this image, you import its white balance data for the white balance setting. Each color can be corrected to one of nine levels. This is called white balance bracketing. The processing parameters can be set according to the preset Parameter 1 or Parameter 2 or to Set 1, 2, or 3 that you can set yourself.
You can register and save up to three sets of processing parameters. Select [Parameters]. Page 59 Black-and-White Shooting When you capture images with the processing parameter set to Monochrome, the camera will process and record the images as black- and-white images onto the CF card.
At the same time, the complementary colors will be darkened. Camera Setting Display Auto power off p. Three AF modes are provided.
If this occurs, a picture cannot be taken even if the shutter button is pressed fully. Recompose the picture and try and focus again. This is for obtaining correct focus at the moment of exposure. The AF point can be selected automatically by the camera or manually by you. In the Basic Zone modes, evaluative metering will be set automatically. In the Basic Zone modes, the optimum drive mode is set automatically. This is called Program AE. Page Shutter-Priority Ae s Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture value to suit the brightness of the subject.
This is called Shutter-Priority AE. A fast shutter speed can freeze the motion of a fast-moving subject and a slow shutter speed can blur the subject to give the impression of motion.
Page Aperture-Priority Ae f Aperture-Priority AE In this mode, you set the desired aperture and the camera sets the shutter speed automatically to suit the subject brightness. This is called aperture-priority AE. Page Manual Exposure a Manual Exposure Standard exposure index Exposure level mark In this mode, you set both the shutter speed and aperture value as desired. This method is called manual exposure. Set the exposure. It is effective for group photos and landscapes. The camera uses the nine AF points to detect the nearest and farthest subjects to be in focus.
Page Setting Exposure Compensation Setting Exposure CompensationN Exposure compensation is used to alter the standard exposure setting set by the camera. You can make the image look lighter increased exposure or darker decreased exposure. If the drive mode is set to single image u , you must press the shutter button three times. After locking the exposure, you can recompose the shot while maintaining the desired exposure setting. This is called AE lock.
It is effective for backlit subjects. Page Bulb Exposures Bulb Exposures When bulb is set, the shutter stays open while you hold down the shutter button fully, and closes when you let go of the shutter button.
This is called bulb exposure. Fn [Mirror lockup] set to [1: Enable] p. The mirror can be swung up separately from when the exposure is made. This prevents mirror vibrations which may blur the image during close-ups or when a super telephoto lens is used. This can be set in all shooting modes. Get closer to the subject and repeat steps 2 to 4. Page Image Playback Image Playback This chapter explains image playback operations such as how to view and erase captured images and how to connect the camera to a TV monitor.
To keep the image displayed, set [Hold]. To not have the image displayed, set [Off]. Page Auto Image Rotation Auto Image Rotation Vertical shots can be rotated automatically so that they are displayed upright during playback. Auto rotate will not work with vertical images captured while [Auto rotate] was [Off]. Select [LCD Brightness]. The horizontal axis indicates the brightness level darker on the left and brighter on the right , while the vertical axis indicates how many pixels exist for each brightness level.
Display the image. Each image will be displayed for about 3 sec. Images will then be displayed in the correct orientation during playback. Always turn off the camera and the television before connecting or disconnecting them. Download free Canon user manuals, owners manuals, instructions, warranties and installation guides, etc.
The 20D features a new sensor and a greater megapixel count 8. The 20D supports USB 2. The 20D has a larger buffer and can shoot more frames per second. It is a variant of the 20D designed for astrophotography. On 1 June Canon announced that the 20Da would be made available worldwide. In conventional photography, the IR filter is used to make the spectral response of the CMOS sensor more like that of the human eye.
In this way, the pictures gathered by the sensor more closely resemble the world as we see it. The IR filter of the 20Da passes 2. As a side effect, the color balance is slightly altered in normal daylight photography. It is extremely difficult to focus an extremely dim image with a reflex viewfinder; locking the mirror up and opening the shutter live view was introduced in the 20Da to address this issue. When used the camera provides a live image of the center of the field of view to allow focusing on a bright star.
Live view for this application requires a lens which supports fully mechanical focus in manual mode, and is not suitable for normal daytime use. The latest firmware available for the 20D and believed to be the final update is version 2. Canon EOS 20D 8. This body works fine with no problems.
I send a product by EMS. Condition is Used.
0コメント